Diesel forklift truck RX 70 6.0 - 8.0 t

The visual warning system for fewer accidents

The blue warning light, STILL SafetyLight 4plus, significantly increases work safety in areas which are confusing or full of bends. The blue light spots are projected approx. 5 m in front of and behind the truck and warn people about the approaching truck to prevent impending collisions.

Perfect addition to the STILL SafetyLight

The STILL warning zone light projects two strips of light to the left and right of the forklift truck. The optional illumination equipment serves as a visual warning for pedestrians and other drivers in the vicinity by projecting luminescent strips on the hall floor at the sides of the forklift truck.

The STILL Warning Zone Light Plus projects a semi-circle around the rear of the truck. This also increases awareness of the truck and marks a typical danger zone when approaching. This reduces the risk of pedestrian injury.

The STILL Warning Zone Light and the STILL Warning Zone Light Plus therefore perfectly complement the STILL Safety Light, which projects a blue cone of light in the front of the truck in the direction of driving.

With the breathalyser, the driver has to carry out an alcohol breath test before they can operate the truck. The truck is only released once the test has been passed. The advantage of the test is that it is very difficult to manipulate the results and can help to prevent accidents. Thanks to interchangeable mouthpieces, it is hygienically safe.

The broadband alarm is an audible alarm that emits a broadband signal tone. Over longer distances, the tone is drowned out by ambient noise. However, in the immediate environment the noise and thus the source of danger are very easy to locate. This increases awareness of the truck and prevents accidents.

Bracket systems protect drivers thanks to their stable structure and assembly within the truck contour. We also offer fitting and retrofitting for trucks with a rear windscreen. This does not restrict the freedom of movement or the all-round visibility of the driver, nor does it make getting on and off the truck more difficult. The manual system can be opened and closed by hand. The automatic system is coupled with the hand brake or accelerator pedal, and closes the bracket as soon as the truck begins to move.

The protective grille roof is available in a low or high version, according to the height of the passageways. It protects the driver from falling loads.

Owing to the EasyBelt, the seat belt is already diagonally taut over the driver's seat. When stepping aboard, the driver only needs to climb into the pre-tensed belt. The quick and convenient handling of the EasyBelt makes buckling up a breeze. How you benefit: Cost-effective addition to the belt which ensures that the driver is able to properly secure their seat belt without effort;

Enables quick seat belt fastening and unfastening, thus having a positive effect on productivity;

High comfort level within the driver's work space due to the quick and easy handling of the seat belt – resulting in a high acceptance level from forklift truck drivers;

Easy to retrofit – EasyBelt can easily be retrofitted onto your fleet's counterbalanced forklift trucks.

Keeping the goods in place: the load backrest stabilises the transported goods at the fork carriage back so that they can be securely transported from A to B.

The Reversing Alarm Plus prevents collisions and personal injury. It is a 3D camera-based assistance system for rear monitoring, and also detects the presence of people and objects. A rear view image is displayed on the monitor, whereby the system reliably distinguishes between pedestrians and objects and triggers an appropriate response, such as emitting a warning signal or braking.

The rear warning device alerts the driver to objects and pedestrians behind the truck. It comprises a radar-based rear monitoring sensor for obstacle detection and a light indicator with signal tone. The reach and width of the monitoring area can be individually configured. The light indicator and signal tone warn the driver of a potential collision.

Buckled up? If not, the seat belt control ensures that the driving speed is automatically reduced. In cab trucks, the system only engages when the cab door is open.

A flashing, warning or rotating light increases safety at the warehouse and makes other employees working in the warehouse aware of the forklift truck via a flashing yellow light signal. If preferred, this can be set to only light up when reversing. The use of this light increases safety particularly in areas where hearing protection is required to be worn. The rotating light is available in various designs and can be mounted on or behind the overhead guard.

Access control perfectly integrated into the truck with different types of access authorisation for one or more trucks: with FleetManager 4.x you are free to choose the type of access authorisation for one or more trucks: chip, FleetManager card, your personal plant ID card or a PIN.

Thanks to the smart auto-logout function, the trucks are automatically deactivated after a freely selectable period of time – this also increases safety.

Digicode systems (PIN) are an easy way to prevent unauthorised use of the truck. The truck can be started up quickly and easily, simply by entering the PIN code. This allows the user to limit access authorisation to specific individuals or groups. It is possible to configure up to ten PIN codes.

The ceiling sensor detects low ceiling heights and prompts the driver to reduce their speed in order to promote general work safety in the warehouse. It comprises an ultrasonic sensor on the roof of the truck, which detects ceilings up to a height of 20 m. Depending on the sensor signal, the maximum speed is controlled, whereby the standard speed is 6 km/h.

Equipping forklift trucks with a fire extinguisher can help prevent the risk of fire. This should be clarified as part of the risk assessment. This enables fast and direct action in case of fire, thus preventing major damage.

Windows can be broken with the emergency hammer provided.

The fork camera prevents damage to goods, personal injury due to falling loads, and collisions with the shelving. The system is mounted on the inner side of the fork tips and improves the visibility of the load, particularly at large lift heights, as the camera view is displayed on the driver’s monitor.

Forks up, speed down:

More safety, less product breakage and ensuring proper vehicle use - these are the benefits offered by the Speed Reduction assistance system when the fork carriage is raised. As soon as the forks reach a height of 500 mm (or another defined threshold), the speed of the vehicle is automatically reduced. Even if a driver forgets that he should not drive with the load raised, the assistance system slows him down, guaranteeing safe handling of the load and vehicle.

The camera systems for fork carriage, outer mast and rear offer improved visibility and thus help to prevent collisions with the warehouse infrastructure, as well as personal injury. The camera, which is attached to the truck according to its position, improves the driver’s vision of the environment by displaying an image on the driver’s monitor of everything that is captured by the camera in front and behind the truck.

The panoramic mirror, which can be mounted on the left or right side of the truck, improves visibility and reduces the size of the blind spot by expanding the field of vision. Drivers are able to get a quick overview of what’s behind them, allowing them to work more safely.