Warning signals

Safety solutions

Make sure that potential risks can be seen and heard.

If you can see potential hazards, you can avoid them. Make your forklift trucks more visible by means of optical or acoustic alarms. These can protect people and trucks in your warehouse or production areas.

Perfect addition to the STILL SafetyLight

The STILL warning zone light projects two strips of light to the left and right of the forklift truck. The optional illumination equipment serves as a visual warning for pedestrians and other drivers in the vicinity by projecting luminescent strips on the hall floor at the sides of the forklift truck.

The STILL Warning Zone Light Plus projects a semi-circle around the rear of the truck. This also increases awareness of the truck and marks a typical danger zone when approaching. This reduces the risk of pedestrian injury.

The STILL Warning Zone Light and the STILL Warning Zone Light Plus therefore perfectly complement the STILL Safety Light, which projects a blue cone of light in the front of the truck in the direction of driving.

Solution available for following trucks

Salutation*
This site is protected by Friendly Captcha and the Friendly Captcha Privacy Policy applies.

STILL SafetyLight 4plus

In areas with poor visibility or where there are a lot of turns, the STILL Safety Light and STILL Safety Light 4Plus provide a significant improvement in work safety. The blue light spots are projected approx. 5 m in front of and behind the truck and warn people about the approaching truck to prevent impending collisions.

How you benefit:

  • Increase in the level of work safety for pedestrians and other parties involved in internal traffic thanks to fast responses even in areas with poor visibility.
  • As the STILL Safety Light 4Plus also indicates the direction of the truck with its four light points, pedestrians are alerted to the truck even more quickly, giving them more time to react.
  • Minimal impact on the truck operating time thanks to energy-efficient LED bulbs (5 W at 12 V)
  • Maintenance-free operation and a long service life of 20,000 hours
  • Minimal scattering and thus perfect visibility even on light-coloured floors.

Solution available for following trucks

Salutation*
This site is protected by Friendly Captcha and the Friendly Captcha Privacy Policy applies.

Mast headlights

These LED headlights improve the lighting conditions to the sides of the tuck and reduce the glare effect as they do not reflect off the mast from behind. This way, higher rack areas are also illuminated.

Solution available for following trucks

Salutation*
This site is protected by Friendly Captcha and the Friendly Captcha Privacy Policy applies.
Rotating light

A flashing, warning or rotating light increases safety at the warehouse and makes other employees working in the warehouse aware of the forklift truck via a flashing yellow light signal. If preferred, this can be set to only light up when reversing. The use of this light increases safety particularly in areas where hearing protection is required to be worn. The rotating light is available in various designs and can be mounted on or behind the overhead guard.

Daytime driving light

Safe operation at all times: the LED daytime driving light ensures that the forklift truck is always clearly visible even in darker areas. A daytime driving light is available for various trucks.

Broadband alarm

The broadband alarm is an audible alarm that emits a broadband signal tone. Over longer distances, the tone is drowned out by ambient noise. However, in the immediate environment the noise and thus the source of danger are very easy to locate. This increases awareness of the truck and prevents accidents.

Integrated horn on rear handle

The integrated horn is located on the handle to the rear of the overhead guard. The horn signal sounds at the push of a button. Thanks to this simple and ergonomic method of signalling, when reversing the driver can warn pedestrians in the area that the truck is approaching.

Reversing light

The reversing light is a long, multi-coloured light on the back of the truck, which automatically emits a constant red light during forward travel and switches automatically to a flashing white light when the truck is in reverse.

The reversing light increases the visibility of the truck and thus reduces the risk of accidents as other traffic and pedestrians are able to easily identify the direction of travel.

The light, which is protected by a U-shaped frame, is anti-glare and can be attached to various points on the truck.


Downloads

Would you like to make your intralogistics safer?

Our experts are on hand at all times to answer any questions you may have about our safety portfolio.

Fill out the form

We will get back to you as soon as possible.

Call a consultant

Your direct line to our experts

Request to: Warning signals

Please fill out the form below. We will get back to you as soon as possible.

Salutation*
This site is protected by Friendly Captcha and the Friendly Captcha Privacy Policy applies.